English Chinese (Simplified) French German Italian Japanese Russian Spanish
                                      Printable PDF File of This Data Sheet

 
Request More Information

 

What Is ScanINSPECT WBI?

ScanINSPECT Wire Bond Inspection (WBI) provides a simple and user-friendly alternative to inaccurate and time-consuming manual inspection methods or expensive, high-end AOI systems.

 

ScanINSPECT WBI uses a simple Windows user interface integrated with a manual load table and image-processing unit. This combination allows 100% inspection of presence/absence of wire bonds.

 

 

How Does ScanINSPECT WBI Work?

ScanINSPECT WBI provides 100% 2D non-contact verification of absence / presence of Al or Au wire bonds before adding further value to the assembly.

 

Provides offline inspection for low volume production or SPC sampling for high volume production.

 

Each part or substrate is placed from the wirebonder into ScanINSPECT WBI for 100% inspection. The part is then accepted and continues on with the process or rejected for disposition. No more surprises!

 

 

 

Quick & Simple Programming

ScanINSPECT WBI is quickly programmed from a golden part in a few minutes.

 

 

Increased Yield & Improved Overall Equipment Efficiency

ScanINSPECT WBI's powerful inspection process increases product yield by ensuring accurate wire bond placement, thus assisting with high yields and minimal rework and/or scrap.

 

Missing wire bonds can result in lost production time and extensive rework. ScanINSPECT WBI eliminates operator fatigue and tedium from the inspection task, and automatically verifies 100% of the bonds.

 

Missing wire bonds are now automatically detected. Problems are logged and eliminated before more value is added to defective parts.

 

 

Simplicity

ScanINSPECT WBI set up is fast and easy. In production, each board is placed on the inspection table, scanned, and automatically aligned and checked for accuracy with a PASS or FAIL inspection in seconds.

 

Failures are detected, logged and printed for easy rework identification.

 

 

Why Use ScanINSPECT WBI?

  • Mandatory:   100% automatic inspection of wire bonds.
  • Security:       Confirm wire bond absence / presence.
  • Necessity:    Detect errors before adding further value to defective parts.
  • Flexibility:     Inspect a wide variety of part sizes and shapes.

 

 

Technical Specifications*

System Specifications*

  • Maximum Board Size: 18" X 20" (457mm X 508mm)**
  • Minimum Board Size: 2" x 2" (50mm x 50mm)
  • Maximum Inspection Area: 16.5" X 20" (419mm X 508mm)
  • Scanning Resolutions:
      400/1000/1600/2000/2400/3200/4000/4800 dpi*
  • SMEMA Interface
  • CE Certified

*  Reduced Scanning area for 3200 & greater

**XL size conveyor

 

 

 

 

Footprint of Inspection Unit

  • Length: 41.7" (1060mm)
  • Width: 42.9" (1089mm)
  • Height: 57" (1450mm) excluding light tower
  • Weight: 330lbs. (150kg)

 

 

Computer*

  • Multi Core Processor - 3 GHz
  • 1 TB 7200 RPM HD, 8 - 16 GB RAM
  • CD/DVD ROM -  for archive purposes
  • Flat Screen Monitor (17" or larger)
  • Ethernet connection
  • Windows 7 or 10 - 64-Bit
  • 2 available USB ports - USB2 or USB3

    *Recommended customer-supplied minimum PC requirements.

 

 

The following are trademarks of the indicated companies: Gerber, Ucamco N.V.; Windows 7, 10, Microsoft®; ScanCAD™ and ScanINSPECT WBI™ are trademarks of ScanCAD International, Inc. *All specifications and designs subject to change without notice.*

 

Google+